1. Measure each room
Measure length and width of every interior room in feet. Note alcoves, closets, and bump-outs separately.
कैलकुलेटर वर्कस्पेस
कुल स्क्वायर फुटेज की गणना करने, फ्लोरिंग सामग्री का अनुमान लगाने और अपने प्रोजेक्ट की योजना बनाने के लिए अपने हाउस के आयाम दर्ज करें।
हाउस स्क्वायर फुट कैलकुलेटर का उपयोग करें किसी भी हाउस के क्षेत्रफल की गणना करने के लिए। हाउस की लंबाई और चौड़ाई दर्ज करें, और वर्ग फीट, वर्ग गज, वर्ग मीटर और एकड़ में तुरंत परिणाम प्राप्त करें। अंतर्निहित लागत गणना के साथ फ्लोरिंग, कार्पेट और टाइलिंग सामग्री की जरूरतों का अनुमान लगाएं।
अपने प्रोजेक्ट के लिए एक विशेष कैलकुलेटर चुनें — कमरे, आकार, सामग्री, बाहरी क्षेत्र और इकाई रूपांतरण।
House square footage is the total interior floor area of a home measured in square feet. Add the area of every rectangular room together. A 2,000 sq ft (185.8 m²) home is the U.S. median for new construction.
Getting started
To calculate house square footage, measure the length and width of every room in feet. Multiply length × width for each room and sum the results. Exclude unfinished basements, garages, and outdoor patios from real estate square footage.
Measure length and width of every interior room in feet. Note alcoves, closets, and bump-outs separately.
Multiply length × width for each room. Add all room totals to get house square footage.
Use house area for real estate listings, HVAC sizing, insurance valuation, and whole-home material estimates.
Quick reference
Material pricing
House square footage drives the cost of whole-home renovations. Multiply total area by the price per unit of any material covering the entire home.
There are 2 steps to calculate material cost:
Whole-home flooring averages $6,000-30,000 for a 1,500 sq ft home. Whole-home painting averages $2,000-6,000.
Measure the length and width of every rectangular room inside the building. Calculate the area for each room, then add the totals together. Exclude unfinished basements and garages from standard real estate square footage. A house with a 250 sq ft living room, 180 sq ft kitchen, 200 sq ft bedroom, and 50 sq ft bathroom has a total area of 680 square feet.
For rooms with alcoves or closets, measure each rectangular section separately and add the areas. The Square Foot Calculator supports quantity input so you can calculate multiple rooms of the same size at once.
FAQ
हर कमरे की लंबाई और चौड़ाई फीट में मापें, हर कमरे का क्षेत्र पाने के लिए गुणा करें, फिर सभी कमरों के क्षेत्र जोड़ें। Include hallways, closets, and all finished living spaces.
सभी पूर्ण, गर्म रहने योग्य स्थान शामिल होते हैं: bedrooms, bathrooms, kitchen, living room, dining room, hallways, and closets. Garages, unfinished basements, and outdoor areas are typically excluded.
औसत अमेरिकी घर लगभग 2,300 स्क्वायर फीट का होता है। Sizes vary widely by region, with urban homes typically smaller and suburban homes larger.
नहीं, गैराज स्थान आमतौर पर मानक घर के स्क्वायर फुटेज में शामिल नहीं होता। Real estate listings count only finished, climate-controlled living areas.
हर मंजिल को अलग से मापें और कुल को जोड़ें। The ground floor and upper floors each contribute to total square footage. Finished attics count; unfinished attics do not.
घर का स्क्वायर फुटेज संपत्ति का मूल्य, HVAC आवश्यकताएं, नवीनीकरण के लिए सामग्री और बीमा लागत निर्धारित करता है। Accurate measurements help with real estate listings, home improvement budgets, and utility planning.
विश्वसनीय बाहरी स्रोत और इस साइट के संबंधित अनुभाग।