1. Measure garden area
Measure length × width of each garden bed in feet. Sum for total.
Coverage estimator workspace
マルチの寸法を入力して、総平方フィートを計算し、フローリング材料を見積もり、プロジェクトを計画します。
マルチ平方フィート計算機を使用してマルチの面積を計算します。マルチの寸法を入力し、平方フィート、平方ヤード、平方メートル、エーカーで即時結果を取得。内蔵のコスト計算でフローリング、カーペット、タイルの材料ニーズを見積もります。
プロジェクトに合った専門の計算機を選んでください — 部屋、形状、材料、屋外エリア、単位変換。
Mulch is sold by the cubic yard. Multiply garden area × depth in feet ÷ 27 for cubic yards. One cubic yard covers 108 sq ft at 3 inch depth.
はじめに
To calculate mulch needs, measure length × width of each garden bed in feet. Sum for total 平方フィート. Choose depth: 2 inches (0.167 ft) for light coverage, 3 inches (0.25 ft) for weed suppression, 4 inches (0.333 ft) for insulation. Multiply area × depth ÷ 27 for cubic yards.
Measure length × width of each garden bed in feet. Sum for total.
2 inches for light. 3 inches for weed control. 4 inches for insulation.
Cubic yards = (area × depth in feet) ÷ 27.
クイックリファレンス
基本公式
面積とは、2次元の形状が占める空間の量です。形状は床、壁、遊び場、または野原です。面積の最も簡単な公式は、任意の長方形に適用されます:
空間の長さと幅をフィートで測定します。2つの値を掛けて平方フィートの面積を求めます。長さ12フィート(3.66メートル)、幅10フィート(3.05メートル)の長方形の部屋は、120 sq ft(11.15 sq m)の面積があります。
平方ヤードはヤードで測定された面積であり、平方メートルはメートルで測定された面積です。フィートで測定し、平方フィートで面積を求め、必要な単位に変換します。
L字型の部屋の場合、床を2つの長方形セクションに分割し、各面積を計算し、結果を足します。寸法がインチとフィートなど異なる単位の場合は、掛け算する前にすべての測定値を同じ単位に変換してください。
形状公式
The Mulch Calculator supports rectangle and circle formulas for landscaping bed measurements.
フィートでの測定値を使用:Area (ft²) = Length × Width. A rectangular flower bed 20 feet long and 4 feet wide has an area of 80 square feet. At 3 inches deep, this bed needs about 0.74 cubic yards of mulch.
フィートでの測定値を使用:Area (ft²) = π × radius². A circular tree ring with a 6-foot diameter (3 ft radius) has an area of about 28.3 square feet. Use this formula for round flower beds and tree surrounds.
ロス率
切断、破損、パターンマッチング時の材料ロスを考慮して、計算した面積に10%の余裕を加えます。このロス率は、床材、カーペット、タイル工事、造園材料に適用されます。
床面積200 sq ftの部屋には220 sq ftの材料が必要です:200 × 1.10 = 220 sq ft。対角線の床材施工パターンや多くのカットを伴う複雑なタイルプロジェクトの場合は、余裕を15%(1.15を掛ける)に増やします。平方フィート計算機には、この計算用のロス率フィールドが含まれています。
FAQ
A standard 2 cubic foot bag of mulch covers about 12 square feet at 2 inches deep, or 8 square feet at 3 inches deep. For 100 square feet at 3 inches deep, you need about 13 bags.
Measure the length and width of the bed in feet, multiply to get square footage, then multiply by the desired depth in feet. A 10×20 bed at 3 inches (0.25 ft) deep needs 200 sq ft × 0.25 ft = 50 cubic feet of mulch, or about 1.85 cubic yards.
Apply mulch 2 to 4 inches deep for most landscaping beds. Use 2 inches for fine mulch and flower beds, 3 inches for general landscaping, and 4 inches for paths and play areas. Do not exceed 4 inches.
Calculate square footage, multiply by depth in feet, then divide by 27 to convert cubic feet to cubic yards. For 500 sq ft at 3 inches deep: 500 × 0.25 = 125 cubic feet ÷ 27 = 4.63 cubic yards.
Mulch costs $0.05 to $0.15 per square foot at 2-3 inches deep for bagged mulch. Bulk mulch delivered costs $15 to $65 per cubic yard. A cubic yard covers about 160 sq ft at 2 inches deep.
Replace organic mulch annually or add 1-2 inches of fresh mulch each year. Bark mulch lasts 1-2 years, wood chips last 2-3 years, and rubber mulch lasts 10+ years. Replenish when the depth falls below 2 inches.
信頼できる外部ソースとこのサイトの関連セクション。外部リンクはWikipediaや政府機関の権威ある参考文献を開きます。